net_graphheight Command Tips and Help

Most of the time, frames per second (fps) in Counter-Strike: Global Offensive help us monitor how well our computer runs. Most people use the net_graph to look at their fps, but there are other ways. So, this post will show you how to use these simple methods to show fps. We’ll also talk about other groups of commands that can help you show fps and how to change this feature.

You must turn on the developer console before you do anything else!

In the CS:GO menu, go to Options > Game Settings > Enable Developer Console > Yes.

However, remember to allocate a key to your console in Options > Keyboard/Mouse > Toggle Console.

After that, you can open it by hitting the tilde (~) key next to the number 1 on most classic keyboards. You may perform this on the main screen or in the middle of a match. To ensure you did everything right, it’s better to choose the second choice and check immediately to see if the command worked. 

Net_graph Commands

This is the best and most basic way to see your FPS. 

The CS2 net graph is an extra part of the interface that lets you see how stable and good your internet connection is while you play. A bar in the upper right part of the screen shows connection speed, ping, latency, FPS, interpolation, tick rate, and other useful data that you can use to see how your hardware and network are doing. This very accurate tool doesn’t need extra software because it comes with the game. 

When you type it into the prompt, this first command will turn on net_graph: net_graph 1

When you run the above command, the Net Graph will start up, and you’ll see two clear colors, green and red, in the upper right part of your screen right away. These colors let you know how good your internet connection is:

• Green: This means your internet link is strong and stable, allowing you to play without problems.
• Red: This means the link is unstable and weak, which can cause lag and interruptions during games.

Enter the command cq_netgraph 0 in CS2 to turn off the netgraph.

Net_graph Size

The next thing to do is make the fps number bigger or smaller. There are only two sizes, which is a shame, but they look bigger when the quality is lower.

• net_graphproportionalfont 0
• Compressed net_graph

The net_graph looks better and smaller when your CS:GO language is set to a Cyrillic script language spoken in the CIS region, like Russian, Ukrainian, or Bulgarian. It looks even cooler when you set the net_graphproportionalfont to 1. 

Net_graph Position

Now, you can use two different commands to move your net_graph. With this command, the net_graph goes in the direction of the x-axis: net_graphpos x (you can pick any number for x)

You are free to enter any number you want. The number 1 is in the middle, the number 2 is slightly to the left, and the number 3 is on the left. After number 3, the values that come after it move to the far left first and then slowly move back. This means numbers 1, 2, and 3 are simplified places, and the bigger values are in the middle. You should use the following command to move your net_graph across the y-axis to gain more control over where it is: net_graphheight x (x can be any number from 0 to 9999)

We like net_graphheight 55 or something in that range. Depending on your quality, if you want it to be at the top, the net graph should be closer to 900. 

More Net_graph Commands

The screen now shows you information about your network link. However, you might want to use other tools to learn more about possible speed problems. So, it’s also a good idea to turn on Telemetry.

To turn on Telemetry, go to Settings and look for Telemetry under “Game.” From this page, you can pick whether to show your ping, packet loss, FPS, and frame rate on your net graph. With this function, you don’t need to use the Counter-Strike: Global Offensive CS net graph commands, which are much harder to understand.

Go to Settings and look for Telemetry under “Game.”

If you think the graph will be too much for you to handle, you can hide it when there are problems. You can do this from the menu by going to graph settings.

Also, you don’t need to change the csgo net graph size anymore since the latest visual updates. The settings for both the graph and the data are now too small to affect how you play.

Bonus: How to turn on and off both the net_graph and the scoreboard at the same time.

net_graph “1”;

net_graphpos “2”;

net_graphheight “9999”;

alias “+scorenet” “+showscores; net_graphheight 0”;

alias “-scorenet” “-showscores; net_graphheight 9999”;

bind “TAB” “+scorenet”

(You should copy and paste these into your settings.)

Warning: This order has caused some people’s frame rates to drop significantly.

To eliminate it, unbind the TAB from all its commands and reassign the key. Most importantly, don’t forget to set net_graphheight back to normal; if you don’t, you won’t see it even if you have net_graph 1.

Cl_showfps Commands

Most people use the net_graph commands instead of the cl-showfps commands. Still, they are important enough to discuss. Let us look at them:

cl_showfps 1

Many people don’t know this, but this command can show your FPS in multiple ways. You can do more with cl_showfps!

cl_showfps 2

This shows the record lows, highs, and frame delay, along with the frame rate and the map’s name.

cl_showfps 3

This command shows you the server speeds without the map name or the fps number.

cl_showfps 5

This shows the frame rates of various parts and the frame times in milliseconds. This works better for checking performance than playing all the time.

If you don’t use 1, 2, 3, or 5, the fps clock will either go away or show the same thing value 1 does: the map you’re on and the number of frames per second. Net_graph works pretty much the same way. 

You may have wondered why we didn’t talk about cl_showfps 4. The reason is that the command is the same as cl_showfps 1.

Steam’s in-game FPS counter

Testing your computer’s limits with the commands cl_showfps and net_graph is also a great way to monitor its speed and look for anything that doesn’t seem right. However, some people don’t like either of these commands, possibly because they’re in the wrong place or size. 

But there is still a third choice: the Steam fps counter. This is a good feature of the Steam overlay, but it only updates slowly, like once a second.

If you want to use the Steam FPS number, go to the Steam overlay menu (Shift+Tab) –> Settings (bottom middle) –> In-game (far-right) –> In-game fps counter (pick where you want it to be).

Conclusion

Keeping an eye on your frames per second (FPS) in Counter-Strike: Global Offensive (CS:GO) is important for getting the most out of the game. Players can use the net_graph commands to access a full tool that lets them check their hardware and network settings right from within the game. 

Other prompts and settings, like cl_showfps and the Steam in-game FPS counter, give players even more ways to customize and choose their actions. By learning how to use these tools correctly, players can improve their experience and keep their performance levels stable and high.

FAQs

1. How do I enable the developer console in CS:GO?

To enable the developer console in CS:GO, go to Options > Game Settings > Enable Developer Console > Yes. Then, allocate a key for the console in Options > Keyboard/Mouse > Toggle Console. You can open it by pressing the tilde (~) key next to the number 1 on most keyboards.

2. What command do I use to display the net_graph in CS:GO?

To display the net_graph, type net_graph 1 into the console. The upper right part of your screen will show various performance metrics, including FPS, ping, and latency.

3. How can I adjust the size of the net graph?

You can adjust the size of the net_graph using the net_graphproportionalfont 0 command. This command allows you to make the FPS number bigger or smaller, though only two sizes are available.

4. How do I move the position of the net graph on my screen?

To move the net_graph horizontally, use the command net_graphpos x, where x is any number. To move it vertically, use the command net_graphheight x, where x can be any number from 0 to 9999. For example, net_graphheight 55 positions it closer to the top.

5. What are the different cl_showfps commands, and what do they do?

The cl_showfps commands have different functions:

• cl_showfps 1 shows the current FPS.
• cl_showfps 2 shows record lows, highs, frame delay, and the map’s name.
• cl_showfps 3 displays server speeds without the map name or the FPS number.
• cl_showfps 5 shows frame rates and frame times in milliseconds, which is useful for performance checking.