CS:GO Wallhack Console Command Guide

However, who’s to say that you can’t take a break from your competitive sessions, turn off your brain, and have some fun? Regardless of whether you’re ranked Silver I or Global Elite, the CSGO wall hack command is a hilarious way to pull a sneaky one on your competition and make them tilt. 

Let’s take a closer look at the CSGO wall hack command, understand what it does and what you need to do to activate it in your own games. 

If you’re new to the game, it’s completely normal to be unaware of the sheer amount of cheats available through the console. The CSGO wall hack command, in particular, is by far one of the most commonly used out there. That being said, you might be wondering, what’s it for? 

Essentially, activating the WH cheat enables players to see through walls, gaining a competitive advantage against their enemies. This will enable you to quickly locate the opposing team’s whereabouts on the map, make your way around them without being spotted, and sneak up from the back for a quick one-tap. 

Everything in the game will remain the same, except all the polygons that make a moving character are shown in blue and can be seen from anywhere. 

The CS: GO console allows players to fully customize the game’s surrounding elements and aspects. It also allows users to edit server variables while the game is running, rather than editing a config file and having to restart the game every time a change is made. By using the console, players can take advantage of graphical options that are not found in the options menu. 

All cheats in the game, including the CSGO wall hack command can be triggered and activated using the console. To access it, all you need to do is tap on the tilde (~) key of your keyboard. In some cases though, the console might not be enabled through the settings. Here’s what you need to do to activate it: 

• Launch CSGO and open up the game Settings. 

• Make your way to the Game tab, located at the top.

• Set the Enable Developer Console feature to YES. 

• Exit the Settings menu.

• Tap on the tilde (~) key to access the console.

In order to activate the WH mode or any other cheat in the game, you need to enable cheats by entering a simple command in the console. This can only be done by a server admin, in order to ensure fair competitive gaming when it comes to ranked play. Whether you want to enable or disable cheats in your match, these are the commands: 

• sv_cheats 1: Activates cheats in a match.
• sv_cheats 0: Deactivates cheats in a match.

After enabling cheats in your match, typing in CSGO wall hack command should be a walk in the park. There are a few different types of WH modes that you can take advantage of, depending on what you’re aiming for. Let’s have a look at some of the more popular ones, as well as their prompts and activation process. 

Most Commonly Used Method

The most popular command to enable the WH cheat is, of course, r_drawothermodels, allowing you to see the location of players through walls and other obstacles. This command was initially intended for developers to see how the map is built and discover any unwanted glitches. These are the commands associated with it, that you can type in the console: 

• r_drawothermodels 2: Activates the CSGO wall hack command.
• r_drawothermodels 1: Deactivates the CSGO wall hack command.

Wireframe Mode

Another popular WH command that players take advantage of is the wireframe command. Entering it in the console will activate a special mode, where wireframes of objects are displayed in blue-colored lines. Depending on the mode of command that you choose, there is a chance to spot an enemy through thin obstacles such as containers. To activate or deactivate it, insert the following commands in the console: 

• mat_wireframe 2: Activates the wireframe wallhack mode.
• mat_wireframe 0: Deactivates the wireframe wallhack mode.

Skeleton Mode

This is quite an interesting one. When the skeleton wallhack command is inserted in the console, all enemies are shown in the form of skeletons. They are displayed in a light-blue color and can be seen through any given obstacle on the map. To enable it or disable it, you need to type in the following commands:

• enable_skeleton_draw 1: Activates the skeleton wallhack mode. 
• enable_skeleton draw 0: Deactivates the skeleton wallhack mode.

No matter how much we want to take the easy way to victory and progression, using cheats in competitive mode would completely compromise the integrity of the game. The CSGO wall hack command or any other cheat is not permitted in ranked matches or on most of the game’s public servers. The only person who can activate the sv_cheats command is the server administrator. 

If you’re lucky enough, you might stumble upon a public server that is more oriented towards the fun aspects of the game, rather than competition. In these cases, all cheats are enabled on the server by the administrator, allowing you and the other players in the match to have the time of your lives. 

If you can’t seem to find a fun-oriented public server that allows the use of cheats through the console, there is an alternative solution. You can create your own private server where you can invite your gaming crew to and enjoy the fruits of cheating. 

The easiest way to create a private server is, of course, to rent it from a dedicated provider. The process shouldn’t take more than 5 minutes, after which you will have complete control of what’s available and what’s not. If you are a DIY person, take a look at the steps necessary to get your own dedicated server up and running: 

Install SteamCMD

SteamCMD is a tool for installing and updating dedicated Steam servers. Extract it on your machine to start the server creation process. 

Install CS: GO Dedicated Server

Once you’ve successfully installed SteamCMD on your personal computer, input the following commands:

1. force_install_dir C:csgo-ds
2. login anonymous 
3. app_update 740 validate 

Once you’ve finished, type “quit” to log out from the Steam server.

Generate Your GSLT

GSLT (Generate Game Server Login Token) is a tool used to link a private server with your Steam account. Make your way to the Steam Game Server Account Management page and log in to your account. Enter your CSGO’s app ID and tap on the Create button to generate a token.

Share Port

Boot up the relevant ports such as UDP and TCP ports 27015 to make your server discoverable to everyone. 

Start Your CS: GO Server 

Press the Windows Key + R and type cmd to open the command prompt. Once you’re in the command prompt, type in the following lines:

cd C:csgo-ds

srcds -game csgo -console -usercon +game_type 0 +game_mode 0 +mapgroup mg_active +map de_dust2 +sv_setsteamaccount INDIVIDUAL GAME SERVER LOGIN TOKEN

Make sure that you enter the correct information regarding game mode, map, and so forth. The line above refers to the creation of a casual game in the Dust 2 map. 

Join Your Own Private CS: GO Server 

Once you’re done with everything, it’s time to join your newly created private server and enable as many cheats as you want, including the CSGO wall hack command. Take a look at what you need to do: 

• Launch CS:GO and select Play CS:GO. 

• Click on Community Server Browser.

• Make your way to the Favorites tab and click Add Server.

• Enter your server’s IP address and click on Add This Address to Favorites.

• Revert to the Server Browser and refresh it. 

• Find your server, click Connect to join it, and insert the sv_cheats 1 command in the console to enable cheats. 

We can’t stress this enough, do not by any circumstance resort to using any third-party software that enables their own version of a CSGO wall hack command. Nobody respects a cheater in competitive matchmaking, as players actually put in a significant amount of time and effort to climb through the ranks.

On the other hand, getting detected for using third-party cheats in CSGO is not just a possibility anymore; it’s a certainty. Both Valve and Steam have zero tolerance for hacking and numerous anti-cheat mechanisms in place, ensuring that fair, competitive gameplay is guaranteed at all times. 

Using hacking or cheating software of any kind will get your account immediately flagged and most likely permanently banned. Should you decide to make another one and use third-party software again, you might even get IP-banned. Having an IP ban means that you lose access to CSGO completely based on your location, regardless of how many accounts you try to create.