CS2 Console Commands List
Below is CSGOLucks searchable list of all CS2 console commands. Each command in our database has detailed documentation, with help and argument explanation (hover over a command to view).
sv_spawn_afk_bomb_drop_time
sv_spawn_afk_bomb_drop_time
<Seconds>
This command allows you to modify this setting according to your requirements. You can make AFK players drop the bomb after 5 seconds, or after 2 minutes. Your choice.
Name:
Seconds
Description:
The amount of time, in seconds, that players have while being "AFK" before the bomb drops.
killserver
killserver
Entering this command will shut down the server that you are currently playing on.
sv_consistency
sv_consistency
<0 / 1>
It is a server-side command that enables or disables the server from checking the consistency of players’ critical files with its own files.
Name:
0 / 1
Description:
1 to enable 0 to disable (default)
sv_gravity
sv_gravity
<Gravity>
The name of the command says it all, it’s a command you can use to adjust the gravity settings of the game
Name:
Gravity
Description:
The name of the command says it all, it’s a command you can use to adjust the gravity settings of the game. Its default value is 800, and you can adjust it accordingly: using a lower value will weaken gravity, whereas a higher value will strengthen it.
sv_maxvelocity
sv_maxvelocity
<Speed>
The sv_maxvelocity is a command used for determining the maximum speed moving objects can reach in the game, this is why it’s also known as the CSGO velocity command.
Name:
Speed
Description:
The maximum speed that any moving object can reach in the game.
mp_forcerespawnplayers
mp_forcerespawnplayers
The primary function of the mp_forcerespawnplayers command is to force all dead players in a match to respawn instantly.
sv_skyname
sv_skyname
<Skybox Code>
This command allows players to change the skybox texture, significantly influencing the atmosphere and lighting of the map.
Name:
Skybox Code
Description:
The Sky Box Codes Are Below:
cs_baggage_skybox_
cs_tibet
embassy
italy
jungle
office
sky_cs15_daylight01_hdr
sky_cs15_daylight02_hdr
sky_cs15_daylight03_hdr
sky_cs15_daylight04_hdr
sky_day02_05
nukeblank
sky_venice
sky_csgo_cloudy01
sky_csgo_night02
sky_csgo_night02b
vertigo
vertigoblue_hdr
sky_dust
Vietnam
cs_baggage_skybox_
cs_tibet
embassy
italy
jungle
office
sky_cs15_daylight01_hdr
sky_cs15_daylight02_hdr
sky_cs15_daylight03_hdr
sky_cs15_daylight04_hdr
sky_day02_05
nukeblank
sky_venice
sky_csgo_cloudy01
sky_csgo_night02
sky_csgo_night02b
vertigo
vertigoblue_hdr
sky_dust
Vietnam
sv_party_mode
sv_party_mode
<0 / 1>
The sv_party_mode command is a console command used in CS:GO (now also in Counter-Strike 2) to enable or disable party mode.
Name:
0 / 1
Description:
sv_party_mode <0 / 1>
0 disables party mode (default setting).
1 enables party mode.
0 disables party mode (default setting).
1 enables party mode.
sv_dz_player_spawn_health
sv_dz_player_spawn_health
<100/120>
Sv_dz_player_spawn_health is a CS:GO health command that allows you to set the amount of health you will have while playing in Danger Zone mode. This command cannot be used to manipulate health in other modes.
Name:
100/120
Description:
If you type sv_dz_player_spawn_health 100 your spawn health in Danger zone mode will be 100 instead of the default 120. You don't need to include cheats for this command.
sv_minupdaterate
sv_minupdaterate
<64/128>
The sv_minupdaterate command sets the minimum rate at which the server sends client updates.
Name:
64/128
Description:
Here, represents the desired minimum update rate in ticks per second. For example, setting it to 128 would ensure the server updates the game state 128 times per second, or you can set it to 64.
Mp_ct_default_grenades
Mp_ct_default_grenades
<Grenade Code(s)>
The Mp_ct_default_grenades client command sets the default grenades that counter terrorists spawn with. The default is none (0). Separate multiple grenades with spaces.
Name:
Grenade Code(s)
Description:
The weapon codes of the grenades you wish for CTs to spawn with by default. It you want multiple you can input with spaces.
cl_updaterate
cl_updaterate
<64 or 128>
The cl_updaterate command controls the number of packets per second your game client requests from the server
Name:
64 or 128
Description:
cl_updaterate [Packets per second]
For example, to set the updaterate to 128 packets per second, you would enter:
cl_updaterate 128
It's important to note that you should adjust this setting in the game's main menu, not during an active match.
For example, to set the updaterate to 128 packets per second, you would enter:
cl_updaterate 128
It's important to note that you should adjust this setting in the game's main menu, not during an active match.
host_timescale
host_timescale
<host_timescale>
The host_timescale command is a powerful tool within the developer console of CS2 and CS:GO. The command is set to a timescale of 1.0 by default, representing the game's average speed. Adjusting this value can accelerate or decelerate the game's speed.
Name:
host_timescale
Description:
depending on the desired effect. For instance, setting the timescale to 0.5 would slow the game to half its average speed, while a setting of 2.0 would double the game's speed.
sv_steamgroup
sv_steamgroup
<Group ID>
This command will set the official Steam group of the server. The ID can be found in your group's admins profile.
Name:
Group ID
Description:
Set as the server's official Steam group and replace Group ID.
sv_infinite_ammo
sv_infinite_ammo
<0 / 1 / 2>
Infinite ammo allows for an infinite amount of frags. The sv_infinite_ammo command is frequently used by casual players in private servers, allowing them to fire their guns without having to reload or purchase any ammunition whatsoever.
Name:
0 / 1 / 2
Description:
Set to 0 to disable infinite ammo (default). Set to 1 for never ending ammo in the gun that allows you to shoot forever without the need to reload. Set to 2 for infinite ammo allowing you to still but you still reload after shooting all the ammo in the gun.
rcon_password
rcon_password
<Password>
Using the ‘rcon’ protocol allows you to communicate with the game server without leaving the game. In most cases, it is used to input commands to the CS:GO server that improve and streamline the gameplay experience.
Name:
Password
Description:
This command will authenticate you for rcon with your set password.
sv_specnoclip
sv_specnoclip
<0/1>
By utilizing this command, spectators of a game can roam around the map and go through any barrier as if it were made out of thin air! Quite a neat little feature for those who want to get a better overview of a specific match.
Name:
0/1
Description:
sv_specnoclip 1: This is the default setting that disables gravity for spectators, allowing them to move around the map swiftly.
sv_specnoclip 0: Typing this line in the console disables the CSGO noclip command and takes the free-roam ability away from spectators.
sv_specnoclip 0: Typing this line in the console disables the CSGO noclip command and takes the free-roam ability away from spectators.
sv_showimpacts
sv_showimpacts
<Seconds>
Activating this command can help you improve your aim significantly, and it can make the game much more immersive and entertaining, by showing the bullet impacts.
Name:
Seconds
Description:
This command will sett the amount of time, in seconds, that bullet impact squares show for before they are removed from the game. Th Default is 4 seconds.
sv_grenade_trajectory
sv_grenade_trajectory
<0/1>
Makes the trajectory of the grenades you throw in-game visible or invisible, depending on your preference.
Name:
0/1
Description:
0 disable the grenade trajectory 1 to enable it.
sv_airaccelerate
sv_airaccelerate
<Acceleration>
Using this csgo air acceleration command only affects your speed once you’re airborne and does not impact the speed of the jump itself. Default is set at 12.
Name:
Acceleration
Description:
The amount of acceleration of player speed in the air.
sv_maxrate
sv_maxrate
<Bytes/s>
sv_maxrate is a command that helps you adjust the maximal limit of bytes per second that you request from the server. To set the sv_maxrate command, you need to access the server.cfg file.
Name:
Bytes/s
Description:
The bandwidth, which is in bytes per second. Set to 0 to disable this feature.
Removeid
Removeid
Suppose you have decided to unban a problematic player from your server and give them another shot. First of all, kudos to you for being the bigger person. Secondly, the process of doing so is literally a walk in the park.
cl_interp_ratio
cl_interp_ratio
<1/2>
Interpolation is a feature that adds artificial latency to the way we see the game and is put in the game to adjust the lack of internet speed.
Name:
1/2
Description:
The default value is 2, you can do decimal numbers lower than 2, or if the server does not limit the value, you can benefit from trying higher as well if you have a bad internet connection.
map
map
<Map Code>
The map command in CS:GO is a really straightforward way that the game developer provides you so that you can change the map you’re playing on without leaving the match. You need to type this command into the command console and then add the map name, which is enough to change the map.
Name:
Map Code
Description:
This is the full name of the map you want to play, such as de_inferno. By using map codes.